Tilt the tank

Cradling the AgNO3 tank

Some had asked me what I used to tilt the silver tank (refer to the carbonised bamboo tank here)

It is a simple construction using a scrap 3mm acrylic sheet.

Just use a hair dryer, or paint stripper for faster method to bend the acrylic to its shape.

Acrylic sheet bent into shape using a heating paint stripper
The tilt is just slight for the ease of putting and pulling the plate in/out of the tank.

Comments are closed.

Create a website or blog at WordPress.com

Up ↑

%d bloggers like this: