Day 5 of building the daguerreotype fuming box (Ver 3-3)

Cutting up the CNC’ed bamboo sheet into smaller panels (enough to make 6 boxes). It was then sanded down with the belt sander and hand sand to clean the edges off from any splinters.

Though progress is roughly about 50% now (a lot of panels needs to be sanded down).

IMG_9486
Cutting up the bamboo sheets into smaller panels
The pile to go through, but all in its proper cuts and dimension for them to be consistent
The pile to go through for hand sanding (some may need to be done with the belt sand), but all in its proper cuts and consistent dimension.

… to be continued…

Advertisements